Ripstop sail tape is the best way to repair cuts in the sail of your kite. This "peel and stick" Nylon tape will provide the strength needed to repair small cuts in your kite to get you back out on the water fast.
*Can also be used on paragliders and sails.

The PKS Self-Launch Sand Anchor is another true innovation in the world of kiteboarding and self reliance. This amazing Self-Launch Beach Anchor can be used to self-launch your kite with nothing around but sand.

<p><br />
Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.</p>

Australia water shades are surf polarized sunglasses designed by Ocean for the water lovers.&nbsp; Ocean has developed these surf polarized sunglasses focusing on the most extreme conditions.&nbsp; They have ATOM system polarized lenses which reduce the harmful effects of the suns rays reflecting on the water.&nbsp; The glasses do float thanks to the frames.&nbsp; Additional float included for added protection.&nbsp; <br />

The Hitchsafe Extender Pins are for 2005-2023 Toyota Tacoma and the 2007-2023 Tundra OEM hitch receivers.

Replacment trim/depower rope for sentinel bar system.

Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.

Ozone trimmer handle for V4 or older

2019 Mystic Kite Safety Leash - Long

Features

•  110cm length (unstretched)
•  Soft touch, lightweight material
•  Compact carabiner
•  Neoprene carabiner cover
•  Designed for freeride / allround performance

Length = 43 inches (110cm)

The PKS Replacement Ozone Speed System is the interface between the fly lines and the bridle of the kite. This speed system works on all Ozone depowerable foil kites since 2009 including the Access, Frenzy, Manta, Summit, Blizzard, Subzero, Chrono, R1 , and Hyperlink. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span.

With the PKS Replacment Speed System, you get the option to order Lines only or complete with the pullies.

The Ozone Contact Bar Flag Out Ring Cone..

PKS KISS Loop V2 - Replacement Line with T-Pin

This is a replacement Kiss loop Line only, with the T-Pin to replace your center line.

Includes

• KISS Loop line with T-Pin

Features

•  Compact & lightweight
•  Low friction
•  Deep, secure lashing groove
•  Durable
•  Simple & reliable design
•  Low maintenance

The new PKS Universal Pigtail V3 is the newest pigtail from PKS Distribution for a universal connection between kite and bar. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines or directly to the bridles on the kite and you're all set to connect to the loop or knot on the other side, making a nearly kook-proof connection point.

The pigtails are 6 inches in length, made from Spectra leader line, and come as a set of 4: 1x red, 2x grey, and 1x blue.

V3 Changes:
Double Overhand Knot compared to figure 8 on v2
Full length uniform splice
100% Made In USA

Don't forget to always check kite's pigtails for wear and tear.

Duotone Item No. 44900-8135

Vario Cleat & pulley (SS13-SS22)

Compatibalility:

SS13-SS22 Duotone / North Trust Bar

Duotone Item No. 44900-8191

Iron Heart Stopper Ball & Ring Click Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Click Bar

Duotone Item No. 44900-8168

Front Line Connector Pigtail Trust(SS18-SS22)

Compatibalility:
2018-2022 Duotone / North Trust Bar

Duotone Item No. 44900-8153

Stainless Steel Safety Pulley (SS16-SS22)

Compatibalility:

SS16-SS22

Duotone / North Trust Bar

North Navigator Cleat Kit

Replacement cleat kit for North Navigator control bar.

Includes:     Cleat, Base, 2x screws

North Navigator Landing Line / Flagout Line

Top quality, German-made, extremely high wear Dyneema replacement trim line for the Navigator Control System.

Includes Line, Stopper ball and swivel.

North Kiteboarding replacement Power Bracket for Navigator control system.

North Navigator Elasticised Trim Line

North Navigator Trim Handle and Stopper Ball

Replacement for North Navigator Trim Handle and Stopper Ball

* stopper ball does not include set screw

Depower Main Line (with tubing)

Top quality German-made extremely high wear Dyneema depower line with a special impregnation coating for resistance to abrasion. Comes complete with tubing.

Core Sensor 3 Chicken Loop Small / Standard

The small loop comes standard on the Sensor 3 and is designed for freeriders and freestylers who mostly ride hooked. The smaller loop size lowers the adjuster height, which benefits shorter riders. An elasticized chicken stick is easily manipulated to make hooking in faster. After hooking in, the chicken stick can be passed through the harness hook to avoid unintentional unhooking.

Core Sensor 3 Chickenstick / Lock Tube - Standrad / Small

Replacement for Core Sensor 3 Bar

Replacement Sensor Bar Safety Line

For Sensor 2s and Sensor 3

Replacement Chicken Loop and Finger(lock Tube) for Naish Naish Torque Bar

Replacement Chicken Loop and Finger (lock Tube) for Naish Base Bar or Naish Torque Bar

Replacement ATB (Above The Bar Trim) Naish Torque Loop Chicken Loop, Complete.

Replacement BTB (Below The Bar) Naish Torque  Loop Chicken Loop, Complete.

OEM Factory Naish Depower trimline for Torque Bar, ATB (Above the bar) bar system. High strength Spectra Line.

OEM Factory Naish Depower trimline for Torque Bar, BTB (Below the bar) and Base bar system. High strength Spectra Line, stopper ball and expert riders leash connection.

Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.

Naish Line Organizer and swivel. Great for custom bar builds! This is where the center lines connect to the bar. Works as a trimmer bracket for depower line.

Replacement Naish OEM Pulley Bridle Line. This is a replacement for the small section of bridle line that the slider ring slides on for Naish Kites.

Includes 1 Pulley Line and 2 stopper balls

Sold Individualy

Cabrinha Trimlite Complete Kit

Part - K2PCTLKITSTDXXX
Includes:

• Depower Main Line
• Trim Cleat
• Trim Lite Line
• Trim Handle

Cabrinha Recoil Depower Main Line With PU Tube
Part - KS8RCDPML000STD
Recoil Black multi-bore PU tubing with top funnel, 4mm Dynema mainline, split top Spinning Handle & Transition plug

Cabrinha - Lower Landing SLF Line - Trimlite(TLC)
Trimlite Part - K9PCLNSLF000TLC

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Trimlite Control System

Lower Landing SLF Line - Recoil(RCL)
Recoil Part - K9PCLNSLF000RCL

1x Elasticized Landing Line; Lower section of 1X SLF Front Line.

Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System

Cloud Kites Control System Rebuild / Upgrade

Are your Cloud Kite control system center lines showing more wear than you like? Ship your Cloud Kites control system to us and we will rebuild your center line system with new lines using your existing hardware.

This for the center lines only. If you want a complete system built on a KISS Bar, we can do that too

Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.

he Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4 Click-In Loop.

The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Race and Foil Race Control Bars V4 Click-In Loop.

HitchSafe Replacement Drawer. This is replacement drawer for the version of HitchSafe after 2011. The newest revision of the HitchSafe [launched August 1, 2011] requires a different drawer style and the prior drawer is not compatible with this system. Be sure to also look at the description of our newer drawer HS7041 to be sure you have the right drawer. To know if you have the new style of HitchSafe. The drawer itself is different with each corner having an angle notch out of it. Inside the Vault portion of the HitchSafe above the spring on the back wall will have the following version code: AL-215-311, 2011.If the year is less than 2011, then it is a prior version of the drawer that you will need. Another easy way to tell is that the flange on the body will have 2 rivets on each side.

Replacement drawer for HitchSafes purchased after 2011
Secures keys, cards and valuables during outdoor activities that are a hassle or can become lost
Easily allows you to set and change your own combination any time with 10,000 codes possible
Features all metal construction
Designed specifically for HitchSafe

PKS Bridle Slider / Sheaveless Pulley is only 2.1cm long, yet it is very strong, super lightweight, and designed for performance.