Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
The kite repair kit by FixMyKite.com includes everything you need to do an emergency repair. This kit is essential for any kiteboard trip.
Always check pulleys for wear and tear and replace when needed. A broken or jamed pulley can ruin a kite bridle. $8.25 per pulley
NEW LOWER PRICETuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under any load then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available
Ozone trimmer handle for V4 or older
2019 Mystic Kite Safety Leash - Long
Length = 43 inches (110cm)
This is a replacement Kiss loop Line only, with the T-Pin to replace your center line.
The new PKS Universal Pigtail V3 is the newest pigtail from PKS Distribution for a universal connection between kite and bar. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines or directly to the bridles on the kite and you're all set to connect to the loop or knot on the other side, making a nearly kook-proof connection point.
The pigtails are 6 inches in length, made from Spectra leader line, and come as a set of 4: 1x red, 2x grey, and 1x blue. V3 Changes: Double Overhand Knot compared to figure 8 on v2 Full length uniform splice 100% Made In USA
Don't forget to always check kite's pigtails for wear and tear.
Tef-Gel is a Corrsion inhibitor and Anti-Seize lubricant that is perfect for kiteboarding hardware, specifically for your Foils and Foil boards.
The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and includes the extra PU tube for a tight fit.
These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.
Duotone Item No. 44220-8136 Sliding Stopper for Trust Bar (SS17-22) Compatibalility: 2017-2022 Duotone / North Trust Bar
Designed to give you the freedom to tighten up wherever you are. This is a tool that is nice-to-have on hand. All parts fit inside tool for compact storage in a pocket or Kite bag.
The perfect pocket tool for emergency repairs and adjustments. The Fidget Tool has all the most common bits you'll need for field adjustments, including removable surfboard fins. It has a built-in keychain ring, so you can keep it right at your side any time you leave home. A must have for emergency repairs.
Safety first! With the Adaptive Leash Eye you can attach your safety leash to the front webbing of your harness, which is the safest position since it is always within reach when things go south. Material:
Replacement slider rope for 2019 Mystic Stealth bar
Conversion kit to change you Mystic Stealth Bar with a Kite Hook to a Surf Slider. Includes everything needed. Includes:
Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.
Naish Line Organizer and swivel. Great for custom bar builds! This is where the center lines connect to the bar. Works as a trimmer bracket for depower line.
Replacement Naish OEM Pulley Bridle Line. This is a replacement for the small section of bridle line that the slider ring slides on for Naish Kites. Includes 1 Pulley Line and 2 stopper balls Sold Individualy
Replacement Naish OEM Pulley Bridle Line and Slider set for a complete Bridle refresh. This is a replacement for the small section of bridle line and the slider ring slides for Naish Kites. Includes 2 Pulley Line and 4 stopper balls, and 2 Slider Rind w/pigtails.
Cabrinha Recoil Depower Main Line With PU Tube Part - KS8RCDPML000STD Recoil Black multi-bore PU tubing with top funnel, 4mm Dynema mainline, split top Spinning Handle & Transition plug
Cabrinha - Lower Landing SLF Line - Trimlite(TLC) Trimlite Part - K9PCLNSLF000TLC 1x Elasticized Landing Line; Lower section of 1X SLF Front Line. Replacement Lower Landing SLF lIne for Cabrinha Trimlite Control System
Lower Landing SLF Line - Recoil(RCL) Recoil Part - K9PCLNSLF000RCL 1x Elasticized Landing Line; Lower section of 1X SLF Front Line. Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System
Are your Cloud Kite control system center lines showing more wear than you like? Ship your Cloud Kites control system to us and we will rebuild your center line system with new lines using your existing hardware. This for the center lines only. If you want a complete system built on a KISS Bar, we can do that too
Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.
he Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4 Click-In Loop.
The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Race and Foil Race Control Bars V4 Click-In Loop.
Replacement Blue Trim line for the Ozone Race Bar depower system
PKS Stainless steel trimmer bracket / line organizer is a good replacement for many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure. Includes:
Replacement Bar End Bungees for Ozone V4 Control Bars. - Set Of Two
Duotone Item No. 44900-8154
Metal Ring (SS08-onw)
Compatibalility:
SS08-onw
Duotone / North Trust Bar
The Trust Bar has been the go-to control system for riders who prefer the traditional depower rope and cleat system, but there is nothing traditional about the new 2023 Trust Bar! Instead, it?s packed with the latest technologies, including the new Iron Heart VI Click-In Safety System and FLITE99 lines. This is the only bar you will ever need, as the bar width and line lengths can easily be adjusted to suit your kite. The bar is adjustable between 42 and 49cm with 22m lines with 2m extensions.
HitchSafe Replacement Drawer. This is replacement drawer for the version of HitchSafe after 2011. The newest revision of the HitchSafe [launched August 1, 2011] requires a different drawer style and the prior drawer is not compatible with this system. Be sure to also look at the description of our newer drawer HS7041 to be sure you have the right drawer. To know if you have the new style of HitchSafe. The drawer itself is different with each corner having an angle notch out of it. Inside the Vault portion of the HitchSafe above the spring on the back wall will have the following version code: AL-215-311, 2011.If the year is less than 2011, then it is a prior version of the drawer that you will need. Another easy way to tell is that the flange on the body will have 2 rivets on each side. Replacement drawer for HitchSafes purchased after 2011 Secures keys, cards and valuables during outdoor activities that are a hassle or can become lost Easily allows you to set and change your own combination any time with 10,000 codes possible Features all metal construction Designed specifically for HitchSafe
The Naish fixed stopper ball tightens on to the chicken loop line above the bar to stop you from depowering the kite too much. Requires a hex wrench to tighten.
JDC Skywatch - Wind A pioneer in the field of hand-held anemometers, JDC Electronic has been focusing its know-how on the development of quality anemometers since 1984 with its Skywatch brand, bringing together two watchwords: simplicity & efficiency. The Skywatch Wind measures wind speed, air temperature and wind-chill rapidly and accurately. Small enough to bring anywhere, insensitive to dust and shock with a user-replaceable propeller, the newest member of the JDC family is designed and manufactured in Switzerland.
Duotone Item No. 44210-8124
Lower center line for click bar 22m
Compatibalility: 2018-2023 Duotone / North Click Bar
A Center System rebuild kit for the North Navigator bar that includes all th eparts you need to make you bar new again! Includes:
Fix My Wing Bladders
Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.
The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.
To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.
Core Sensor 3 and 3 Pro Bar Adjuster Rope Sensor 3 and 3 Pro Bar Adjuster Cleat Replacement control bar Adjuster Rope and Stopper Ball for Sensor 3 and Sensor 3 Pro control bars. *Not compatible with Sensor 2 or Sensor 3S
A Sewing Awl works great for harness repair or even to fix a busted footsrap. Can sew through thick tough material and make a fast, durable repair. This has saved us on trips after a harness blew out from one too many uses.
Cabrinha Flagout Swivel
New from PKS Distribution, the Full Carbon KISS Kite bar. 100% hand made in the USA. Available in standard sizes of 45cm, 50cm, and 55cm with custom sizes available upon request. Colored end connection loops are standard for outside line leader connections. Designed in house by Jeff Howard, the Carbon KISS bar was designed with light weight foiling and racing in mind. The bar weigh in as low as 4 ounces. depending on length, and is the ultimate in simplicity and minimalism. Comes with replaceable, Red and Blue mini Leader lines with loops to attach whatever leaders suit your riding style. This bar is available now with custom setups and line lengths. -No slip Matt Grip finish- Grips to hands when wet -7/8" outside Diameter -Full carbon Line winders ends with colored loop ends -Solid carbon polished center hole -Hollow Super light weight ends. -
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next »
Forgot your password?
Already Registered?
OR
