Fixmykite.com ER Fix Kit$49.95
CART (0)
$0.00
The kite repair kit by FixMyKite.com includes everything you need to do an emergency repair. This kit is essential for any kiteboard trip.
Always check pulleys for wear and tear and replace when needed. A broken or jamed pulley can ruin a kite bridle. $8.25 per pulley
NEW LOWER PRICETuff Bladders are different from any other bladder on the market. These bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. while other bladders are stiff and pop easily, the tuff bladders stretch when put under any load then quickly go back to their original shape. use Tuff bladders in any kite when you want the toughest, most durable bladder available
This Sand Weight Bag is a kiter's essential item. You can use the sand weight bag to stop your kite from blowing away on a windy day, reduce sail fluttering which reduces wear on your kite, and also use for self launching. Every kiter could use one or two of these.
Made from stainless steel, the Naish Line Organizer is solid and sturdy. TheLine Organizer/ trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball is included.
Ozone trimmer handle for V4 or older
Repair for the Megatron II Medium Chicken Loop Hrness Loop repair kit. Follow this link for a how-to!!
https://www.youtube.com/embed/il6kxXJsdUQ
The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and includes the extra PU tube for a tight fit.
These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.
Duotone Item No. 44220-8136 Sliding Stopper for Trust Bar (SS17-22) Compatibalility: 2017-2022 Duotone / North Trust Bar
Designed to give you the freedom to tighten up wherever you are. This is a tool that is nice-to-have on hand. All parts fit inside tool for compact storage in a pocket or Kite bag.
The perfect pocket tool for emergency repairs and adjustments. The Fidget Tool has all the most common bits you'll need for field adjustments, including removable surfboard fins. It has a built-in keychain ring, so you can keep it right at your side any time you leave home. A must have for emergency repairs.
Safety first! With the Adaptive Leash Eye you can attach your safety leash to the front webbing of your harness, which is the safest position since it is always within reach when things go south. Material:
Replacement slider rope for 2019 Mystic Stealth bar
Duotone Item No. 44900-8175 Leader lines for Click Bar (SS17-22) Compatibalility: 2017-2022 Duotone / North Click Bar
Duotone Item No. 44900-8141
Hopper with Velcro and Plastic Part(SS08-SS22)
Compatibalility:
SS13-SS22 Duotone / North Trust Bar
Duotone Item No. 44900-8168
Front Line Connector Pigtail Trust(SS18-SS22)
Compatibalility: 2018-2022 Duotone / North Trust Bar
Duotone Item No. 44900-8160 Spare Red Safety Line (SS16-22) Compatibalility: 2016-2022 Duotone / North Trust Bar
Duotone Item No. 44900-8134 Depower Line & Duotone allen key (SS13-SS22) Compatibalility: 2013-2022 Duotone / North Trust Bar
Duotone Item No. 44900-8177 Suicide Ring III Trust Bar (SS17-SS21) Compatibalility: 2019-2022 Duotone / North Trust Bar
Duotone Item No. 44900-8159 Strong Middle Line (SS15-22) Compatibalility: 2015-2022 Duotone / North Trust Bar
Duotone Item No. 44210-8107 Red Safety Line for Click Bar (SS18-22) Compatibalility: 2018-2022 Duotone / North Click Bar
Duotone Item No. 44230-8147 Center Part Insert & Grub Screw (SS14-22) (2pcs) 2014-2025 Duotone / North Trust Bar
North Kiteboarding replacement Power Bracket for Navigator control system.
Replacement Chicken Loop and Finger (lock Tube) for Naish Base Bar or Naish Torque Bar
OEM Factory Naish Depower trimline for Torque Bar, ATB (Above the bar) bar system. High strength Spectra Line.
OEM Factory Naish Depower trimline for Torque Bar, BTB (Below the bar) and Base bar system. High strength Spectra Line, stopper ball and expert riders leash connection.
Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.
Cabrinha - Lower Landing SLF Line - Trimlite(TLC) Trimlite Part - K9PCLNSLF000TLC 1x Elasticized Landing Line; Lower section of 1X SLF Front Line. Replacement Lower Landing SLF lIne for Cabrinha Trimlite Control System
Lower Landing SLF Line - Recoil(RCL) Recoil Part - K9PCLNSLF000RCL 1x Elasticized Landing Line; Lower section of 1X SLF Front Line. Replacement Lower Landing SLF lIne for Cabrinha Recoil Control System
he Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4 Click-In Loop.
The Trust Bar has been the go-to control system for riders who prefer the traditional depower rope and cleat system, but there is nothing traditional about the new 2023 Trust Bar! Instead, it?s packed with the latest technologies, including the new Iron Heart VI Click-In Safety System and FLITE99 lines. This is the only bar you will ever need, as the bar width and line lengths can easily be adjusted to suit your kite. The bar is adjustable between 42 and 49cm with 22m lines with 2m extensions.
HitchSafe Replacement Drawer. This is replacement drawer for the version of HitchSafe after 2011. The newest revision of the HitchSafe [launched August 1, 2011] requires a different drawer style and the prior drawer is not compatible with this system. Be sure to also look at the description of our newer drawer HS7041 to be sure you have the right drawer. To know if you have the new style of HitchSafe. The drawer itself is different with each corner having an angle notch out of it. Inside the Vault portion of the HitchSafe above the spring on the back wall will have the following version code: AL-215-311, 2011.If the year is less than 2011, then it is a prior version of the drawer that you will need. Another easy way to tell is that the flange on the body will have 2 rivets on each side. Replacement drawer for HitchSafes purchased after 2011 Secures keys, cards and valuables during outdoor activities that are a hassle or can become lost Easily allows you to set and change your own combination any time with 10,000 codes possible Features all metal construction Designed specifically for HitchSafe
Fix My Wing Bladders
Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.
The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.
To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.
Core Sensor 3 and 3 Pro Bar Adjuster Rope Sensor 3 and 3 Pro Bar Adjuster Cleat Replacement control bar Adjuster Rope and Stopper Ball for Sensor 3 and Sensor 3 Pro control bars. *Not compatible with Sensor 2 or Sensor 3S
The 9mm Self-Stick-Valve is a very common inflate valve used for years. this one way valve can be easily converted into a 2 way valve if desired.
A Sewing Awl works great for harness repair or even to fix a busted footsrap. Can sew through thick tough material and make a fast, durable repair. This has saved us on trips after a harness blew out from one too many uses.
The Ozone Contact Bar Flag Out Ring with Swivel works on all Ozone snow and water kites for 2014+ model year. This ring is attached to the base of the flag our bungee that runs through the chickenloop.
Cabrinha Flagout Swivel
Designed to bring out the kiter within everyone, the Ignition 3-line trainer kite is smooth and stable with steady response and power to ensure easy progression into all kite sports. The Ignition V3 features our market leading Internal Landing and Re-Launch System - this unique system combined with the Wrist Leash gives you the ability to safely land the kite by yourself and guarantees easy re-launch. If you feel too much power or are ever unsure all you have to do is let go of the bar, the kite will land automatically with minimal power until you are ready to re-launch.
New from PKS Distribution, the Full Carbon KISS Kite bar. 100% hand made in the USA. Available in standard sizes of 45cm, 50cm, and 55cm with custom sizes available upon request. Colored end connection loops are standard for outside line leader connections. Designed in house by Jeff Howard, the Carbon KISS bar was designed with light weight foiling and racing in mind. The bar weigh in as low as 4 ounces. depending on length, and is the ultimate in simplicity and minimalism. Comes with replaceable, Red and Blue mini Leader lines with loops to attach whatever leaders suit your riding style. This bar is available now with custom setups and line lengths. -No slip Matt Grip finish- Grips to hands when wet -7/8" outside Diameter -Full carbon Line winders ends with colored loop ends -Solid carbon polished center hole -Hollow Super light weight ends. -
PKS Stainless steel flag out rings are useful replacements in many bar/line set-ups and depower replacements. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.
Developed in conjunction with Robline, a worldwide leader in technological watersports line manufacturing, and manufactured from Dyneema SK 99 fiber, comes the new PKS Elite 99 Lines. The PKS Elite 99 lines are a high strength, low stretch kite line. The Line sets are manufactured with spliced and sewn loops. Since we manufacture the line sets in house, you get to choose the line length that meets your specific needs. Pre-Loaded lines for a more consistant and responsive feel from kite to bar. This lets you have a greater sense of where the kite is and what it is doing even on a kite with lighter bar pressure. Utilizing an enhanced impregnation and coating process and using a stabalized UV and abrasion resistant protective coating, the lines maintain their consistant and responsive feel for many years of use throughout their life. Features:
All Lines Diameter [mm] - 1.3mm MBL - 380 daN Rated - 850 Pounds Color Coded - Red, Grey, Grey, Blue Spliced and Sewn Line Ends
NEW - PKS Compression Bag V2 - Ultralight
All new Ultralight material, the lightest compression bag on the market. All the same features of the new V2 Compression bag with an internal pocket for self storage and storing small items while the bag is in use. Zero Plastic used in shipping, Storing the compression bag.
Replace your heavy kite bags with these light-weight and durable PKS Compression Bags. You won't believe how much weight and space you can save when packing for a trip. The PKS Compression bag is large enough to fit most kites, including your gigantic light wind kite.
The PKS Compression bags are a must have for travel. They save so much room and weight it is incredible plus there are no annoying zippers to mess with. These bags keep you nice and organized, protect your kite, and greatly lighten your load. Makes packing for a trip much easier and saves room for that extra kite to sneak in your bag. Trust us, after you get these for your kites you will not know how you ever traveled without them. The weight you save will pay for these bags after just one trip.
Like the Dakine compression bag, this bag weighs less than the standard kite backpack to provide protection for your kite during travel while reducing weight and packing size. Unlike the Dakine compression bag, the PKS Compression Bag has reinforced straps that are sewn all the way around the bag for better compression with less stress on the bag and no chance of ripping the bag open.
When Folded into its Own Storage Pockett:
Now available is a less expensive standard bar version. The complete Ready 2 Ride bar includes the most requested features like the mini trim cleat and standard leader lines. Standard Ready 2 Ride Features:
« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next »
Forgot your password?
Already Registered?
OR