Stopper Balls

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and includes the extra PU tube for a tight fit.

These parrel bead stopper balls are UV stable and impact resistant. They measure 16mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.

Duotone Item No. 44220-8136
Sliding Stopper for Trust Bar (SS17-22)

Compatibalility:
2017-2022 Duotone / North Trust Bar

The Naish fixed stopper ball tightens on to the chicken loop line above the bar to stop you from depowering the kite too much. Requires a hex wrench to tighten.

These parrel bead stopper balls are UV stable and impact resistant. They measure 20mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.

The Ozone Trimmer Bracket Stopper Ball is made from strong, durable and high quality plastic. This stopper ball is located at the connection point between the flag-out bungee line and the fly line right at the trimmer bracket.

The Slingshot Power Ball stopper ball tightens on to the chicken loop line above the bar to stop you from depowering the kite too much.

Slingshot's 2010 and newer active stopper ball can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust it to suit the wind speed.

Slingshot's active stopper ball for models older then 2009 can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust the bar throw to suit the wind speed.

Duotone Item No. 44900-8194

V Distributor II for Click Bar (SS18-22)

Compatibalility:
2018-2022 Duotone / North Click Bar

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap.

Naish's sliding stopper can be easily moved up and down the chicken loop rope while riding. This allows you to take pressure off your arms and easily adjust the bar throw to suite the wind speed or to unspin your bar.

This is a Naish, Flag Out Stopper for the center Fly Lines. It can be used on kites that use a Single Front Line Flagout system to prevent the bar from sliding all the way to the kite when flagging out the kite or "punching out"

A simple 2 part stopper that attached to the line with a friction connection tightened by two screws.

Includes:
2 Piece Stopper
2 Screws

Knotless StopperKnotless Stopper allows you to move the stopper anywhere on the line without undoing a knot. The knotless stopper works with flylines and leader lines. Many uses.